Get 20% off! arrow_drop_up

Item has been added

Skip to content

Dental Casting Resin Precision

2,829.00TL 0.00TL
Unit price  per 
Dental Casting Resin Precision


Alias 3d Printer resin is produced in accordance with SLA, MSLA, LCD, DLP 3D printers. You can create quality 3D models on 3d printers between 385 and 405 nm wavelengths.


The casting resin is meth/acrylic ester based. Manufactured for use in casting 3D-printed parts. Optimized for clean and easy burning of finely detailed, high-resolution tooth models for direct casting. Parts made using casting resin evaporate at moderate combustion temperatures without reacting with the investment and offer extremely low thermal expansion. Casting resin creates extremely smooth surfaces. It leaves no ash at the end of the combustion process and provides a non-porous casting.

Printer and resin must be optimized for error-free results

Make sure to preheat the resin in cold weather in winter.

Compatible with LCD, Monochrome and DLP printers.

Shelf life is 3 years from the date of manufacture.

Shake well before use and wear gloves during application.

Do not expose to direct sun during printing.

You can print at room temperature between 20°-35°. Be careful not to print in dusty or high humidity areas.

Work as cleanly as possible, dirty pans or equipment will cause deformation and thus printed objects to fail.

Ventilate the environment where your printer is located during operation.

Please contact your doctor in case of an allergic reaction.

You can view the physical properties of our Cast AshFree M2.265,60odel resin from the table below.

Viskozite / Viscosity25 °C



Tensile Strength / Tensile Strength



Trying / Elongation



Density / Density



Hardness / Hardness


Shore D