Item has been added

Skip to content

Fast & Hard Model Resin (ABS)

511.18TL 0.00TL
Unit price  per 
 

COMPATIBLE PRINTERS

Alias 3d Printer resin is produced in accordance with SLA, MSLA, LCD, DLP 3D printers. You can create quality 3D models on 3d printers between 385 and 405 nm wavelengths.

USE OF

Ideal for rapid prototyping. It provides the ability to print amazing details.

Printed models have physical properties similar to ABS (Acrylonitrile Butadiene Styrene). After the model is printed, it can be painted.

Printed models are highly resistant to falls and impacts.

Make sure to preheat the resin in cold weather in winter.

Compatible with LCD, Monochrome and DLP printers.

Shelf life is 3 years from the date of manufacture.

Shake well before use and wear gloves during application.

Do not expose to direct sun during printing.

You can print at room temperature between 20°-35°. Be careful not to print in dusty or high humidity areas.

Work as cleanly as possible, dirty pans or equipment will cause deformation and therefore printed objects to fail.

Ventilate the environment where your printer is located during operation.

Please contact your doctor in case of an allergic reaction.

You can view the physical properties of our Fast&Hard Model resin from the table below.

Viscosity/Viscosity,

25 °C

550

cPs

Tensile strength/

Tensile Strength

55

MPa

Elongation/Elongation

3

%

Density/Density

1.1

g/cm3

Hardness

87

Shore D